I hate it when bugs fly into the cockpit, especially when they come through the air vent and smack me in the face. I also don't want them making nests inside my vent line. So today began making some screens for the NACA scoops. First, I cut a couple of thin rings from 1-3/4" OD PVC pipe. I pulled out the roll of super-strong screen material I bought a while ago, and cut a couple of circles, then notched them to fit over the rings. I mixed up some 5-minute epoxy and glued the screen material to one of the rings, then while it was starting to cure I shoved it into the front cockpit NACA scoop. Tomorrow, once it all dries, I will trim off the excess screen material and JB-Weld any areas of the assembly that don't seem completely secure. The 2" SCAT tubing will fit over the whole thing with no issues.